BIOLUFT
Specify the priceDescription:
PROCESSING OBJECTS:
Treatment of areas of frequent skin contact (door handles, taps, etc.)
premises (including utilities - elevators, entrances, etc.)
transport (external, internal finishing)
refueling of dez barriers and dez rugs
equipment
containers, containers
pipelines
hatching eggs
TYPES OF PROCESSING:
moisture
aerosol
PERIODICITY OF DISINFECTION:
planned
forced
EFFECT OF THE DRUG:
antimicrobial: gram-negative and gram-positive microflora (including spore-forming forms);
virucidal: all types of viruses (DNA and RNA-containing viruses, in particular, CoVi19);
antiprotozoal: acts against coccidia;
fungicidal: Aspergillus fumigatus, molds, etc .;
acts against yeast.
DOSAGE:
Surface treatment of frequent skin contact (door handles, taps, etc.):
Prepare a working solution of 1-2%
Pour into a household hand or knapsack sprayer
Treat the surfaces that are most in contact with your hands
Do not wash off
Processing of entrances, elevators, etc. domestic premises:
Prepare a working solution of 1-2%
Pour into a household hand or knapsack sprayer
Apply on the surface
Do not wash off
Type / Object Working solution
(preventive / forced.) Consumption r / r Exposure
Wet disinfection
Prevention of bacteria: 0.1-0.25%
virus: 0.3-0.5%
fungus: 1% 0.1-0.3 l / m2 30 min
Forced 1% 0.25-0.4 l / m2 60 min
Incubation eggs 0.25% 1-2 ml / egg 2 minutes
Transport, feed trucks 0.2-1% 0.2-0.5 l / m2 10-15 min
Containers 0.2-0.5% 0.2-0.5 l / m2 10-15 min
Aerosol disinfection **
Room 10 2 ml / m3 60-120 minutes
Incubation eggs 0.25% 50 ml / m3 30-60 minutes
Refueling of floor mats and barriers: 1-2% y / y.
* Does not require rinsing, forms a protective film on the surface
** Disinfection with cold mist generators
Filling desbarriers and deskypils: use 1-2% solution. Top up or replace the solution once every three days, or as it dries or becomes dirty.
Disinfection of pipelines and equipment for watering animals: Pour the working solution of the drug with a concentration of 1% into the water supply system and leave it there for 6-8 hours.
IMPORTANT: The water supply system should not be sealed, as gas is formed during the action of the drug, which can create excess pressure in the system. After the drug, rinse the system with water.
To preserve water supply systems, use 0.03-0.05% solution of the drug, leaving it until the system is put into operation.
Transport treatment: carry out 0.2 - 1.0% solution of the drug by irrigation. Exposure 10 - 15 minutes.
Processing of feed trucks: to carry out 0,2 - 1,0% solution of drug by an irrigation method, aerosol 10% solution at the rate of 10 - 15 l on 1000 m3. Exposure 10 - 15 minutes.
Treatment of hatching eggs: apply a 0.25% solution of the drug by fine drip spraying, or by immersing the eggs in the working solution for 1-3 minutes. When aerosol treatment apply a 0.25% solution of the drug at a dose of 50 ml per 1 m3 of the chamber at an exposure of 30-60 minutes
Disinfection of food industry, food and slaughterhouses: to be carried out in accordance with this instruction and current standards and regulations in the food and processing industry, complying with the requirements of ISO 9001/22002 and HACCP.
ADDITIONAL INFORMATION:
working solutions of the drug:
suitable for use for 3 days
retain their activity in hard water
retain activity in the presence of organic contaminants (feed residues, manure, etc.)
are used at temperatures from + 4 ° C to + 30 ° C
environmentally safe for humans, animals and the environment
after application are gradually destroyed by environmental factors
Prior to disinfection, the premises are mechanically cleaned in accordance with the current instructions: "Instructions for veterinary disinfection of livestock facilities", approved by the Main Veterinary Department of the USSR State Agrarian Industry on August 25, 1988.
Aqueous solutions of the product are used for disinfection. Disinfection is carried out after thorough mechanical and sanitary cleaning of the surfaces of disinfection objects.
The drug has a moderate odor and unlimited solubility in water. At the recommended concentrations, the pH of the drug is close to neutral. Working solutions of the drug are harmless in relation to the treated surfaces, including galvanized and chrome-plated iron, aluminum, plastics, rubber, glass, plexiglass, wood. The drug has the ability to disinfect circulating and wastewater, it is allowed to flush solutions of the drug into the sewer. Bioluft is environmentally friendly, does not pollute the environment, after use decomposes into oxygen, water and lactic acid.
INTERACTION WITH OTHER DRUGS:
The tool and its working solutions have a cleaning effect; incompatible with strong oxidants, anionic surfactants and soaps; compatible with caustic and soda ash.
STORAGE:
Hydrogen peroxide
Lactic acid complex
Water
PHYSICAL PROPERTIES:
Clear liquid color with a faint specific odor.
WARNINGS WHEN USING:
When working with the tool and its solutions it is necessary to use personal protective equipment in accordance with GOST 12.4.103, goggles type G-GOST 12.4.013, universal respirator brand RU-60, RPG-67 with cartridge brand B, PVC gloves. It is forbidden to pour the concentrate into other containers. Preparation of working solutions should be carried out in a ventilated room where there is water. Do not eat, drink or smoke while working with the product. After work, wash face and hands with water. In case of contact with the eyes, they are washed with a 2% solution of baking soda and plenty of water and instilled with a 33% solution of sodium sulfacyl (albucid), for pain - 1-2% solution of novocaine. If the product gets on the skin, it should be washed with a 2% solution of baking soda and plenty of water. First aid in case of poisoning: if the drug accidentally enters the human body, drink 200 ml of 2% soda solution and plenty of water, induce vomiting and consult a doctor.
STORAGE:
Store in a dry dark place at a temperature of 0 ° C to + 30 ° C. Avoid direct sunlight.
Working solutions of the tool do not lose activity for 7-10 days, provided they are stored in closed containers.
EXPIRATION DATE:
6 months from the date of manufacture.